Shake Junt Rise Up Black Riser Pads & Bolts Combo - 1/4"

Shake Junt Rise Up Black Riser Pads & Bolts Combo - 1/4"

Item # 1RSHJ0RIUP125KK
10+ Currently In Stock

Product Information

Shake Junt Rise Up Black Riser Pads & Bolts Combo - 1/4"

These high-quality riser pads are made by Shake Junt and are 1/4" high. Riser pads, or risers, are hard plastic pads that can be inserted between the skateboard trucks and deck to increase the space between your wheels and your board, giving you extra room to try out some bigger wheels. Just remember that if you want to install riser pads to your board, you'll want to increase your hardware length as well. A good rule of thumb for choosing the right hardware to use with your riser pads is to simply add an inch to the height of the riser pads you're using. For example, if you're using .25" riser pads, we recommend getting 1.25" hardware.

NOTE: Black Shake Junt Rise Up Black Riser Pads & Bolts Combo are sold in sets of two unless otherwise noted.


  • Two (2) Shake Junt Rise Up Black Riser Pads & Bolts Combo from Shake Junt
  • Height: 1/4"
  • Provides additional clearance and helps prevent wheel bite
  • Sold in sets of two unless otherwise noted


Shop other Shake Junt Hard Risers from Warehouse Skateboards.

How to Buy Skateboard Riser Pads

What size hardware do I need if I use riser pads?

No riser - 7/8" to 1" hardware
1/8" riser - 1" to 1 1/8" hardware
1/4" Riser - 1 1/4" hardware
1/2" riser - 1 1/2" hardware

Check out the available skateboard riser pads currently in stock.

Do I need riser pads for my skateboard?

Skateboard Risers at Warehouse Skateboards

A riser is a flat plastic pad that can be mounted between the skateboard truck and the skateboard deck. Riser pads increase the space between the truck and deck, raising the board up so that you don't experience wheel bite. Wheel bite occurs when the wheel touches the skateboard deck during a sharp turn and stops the wheel from rotating. Riser pads come in a variety of colors and thickness levels. Depending on your skateboarding style, riser pads can prolong the life of your skateboard deck by reducing the risk for stress cracks where the deck and the trucks meet.

Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, 1/8” risers can help keep the hardware from vibrating loose.

As the wheels get larger, there's a greater chance for wheel bite, which may cause a nasty wipeout. In general, the longer the board and the larger the wheel, the more height is needed in a riser pad.

If you still have questions about skateboard risers, please visit our Skateboard Risers Buying Guide.

You May Also Like

Shake Junt Beagle Rise Up Yellow / Green Hard Riser Pads and Bolts Combo Set
Blank Skateboards H-Block Red Riser Pads - Set of Two (2) - 2mm
Blank Skateboards H-Block Green Riser Pads - Set of Two (2) - 2mm
Crosshair Hard 90a Standard Black Riser Pads - Set of Two (2) - 1/8"