Matt Mumford 51mm/83b Bones Wheels Matt Mumford Pro STF Vintage White Skateboard Wheels - 83b
These brand new Matt Mumford Bones Wheels wheels are high-quality and made to last. They measure 51mm in diameter and 83b in hardness, and will provide a smooth ride. Bones Wheels Matt Mumford Pro STF Vintage White Skateboard Wheels - 83b are sold in (1) set of four (4) wheels.
Note: bearings not included.
About Stree Tech Formula™ (STF)
Street Tech Formula™ (STF) is specifically engineered from top quality components to obtain all the best properties necessary for the ultimate in street wheel performance.
BONES® WHEELS has created a wheel with a substantially higher rebound for more speed and amazing slide capabilities while maintaining a resistance to flat spotting well beyond any standard wheel. The technology behind STF is proven. The results speak for themselves.
Hype is hype, “quality” is for real. Try Street Tech Formula™ wheels on your next setup and see for yourself.
About Durometer B Scale
Shore Durometer A Scale is good, but it does not cover the entire range of skate wheel hardness and is very limited because the scale goes from 1 to 100 and anything over A 95A does not compute accurately.
Shore Durometer B Scale is perfect for skate wheels because:
Shore Durometer D Scale is designed for hard rubbers and rock hard urethanes, not soft, bouncy urethanes that are used in skate wheels. It has a very stiff spring behind its sharp conical needle and often punctures the skin of the wheel being measured, this resulting in 5-10 points softer reading than is correct. Thus, Shore D Scale should not be used for wheels in the useful skate wheel range.
Shop other Bones Wheels Skateboard Wheels from Warehouse Skateboards.
Skateboard wheels vary in color, size, and durability. Skateboard wheels are most commonly made of polyurethane. The diameter and durometer of the wheel affect the way the board rides. The diameter and durometer are a matter of personal preference and skating style.
Diameter is the size of the wheel when measured from top to bottom. All Skateboard wheels are measured in millimeters (mm). The smaller the number, the smaller the wheel. Smaller wheels are slower; bigger wheels are faster.
Durometer measures the wheel’s hardness. Harder wheels are faster; softer wheels are slower but have better grip.
Skateboard wheel durometer is usually measured on a Durometer A Scale which goes from 1-100 to measure hardness. Some companies use the B Scale which measures 20 points lower, allowing the scale to be extended by 20 points for harder wheels. For instance, an 80b durometer is the same as 100a durometer. These skateboard wheels have a larger and more accurate range of hardness. The average wheel durometer is 99a.
Take a look at our insane amount of skateboard wheels currently in stock.
If you still have questions about skateboard wheels, please visit our Skateboard Wheels Buying Guide.