There’s something to be said about skate companies that hold strong for several decades, and Tunnel is no exception. Located in California, Tunnel was founded by pro rider Mitch Haake in 1975. Known for their skateboard decks and wheels, Haake made Tunnel one of the greatest names in the skating industry. Unlike other brands that design gear for specific riding conditions, Tunnel products are built to withstand every terrain and skill levels. Built with high quality materials, Tunnel skateboard decks are available in traditional skateboard and longboard styles. Nothing but old school form with modern performance is what you can expect from these boards! If your passion is cruising, check out Tunnel’s 70s Retro and Marshall Coben decks. Constructed from 7 ply maple, these boards maintain the original skateboard shape with a slight concave for improved performance. With silk-screened finishes and Tunnel logos on the tops and bottoms, these decks are polished perfection. If longboarding is your lifestyle, look no further than Tunnel’s Old School and Baldy Pipeline longboard decks. Also built from 7 ply maple, these pressed longboards have a classic shape with a hint of concave. Tunnel longboard decks also include die-cut grip tape and logo graphics.
If you’re investing in a Tunnel deck, it only makes sense to couple your board with their wheels. Legendary since their creation, Tunnel wheels are one of the quickest and grippiest products on the market. Tunnel skateboard wheels branch out into several models, including Rocks, STR Racing, Tarantula, and Funnel. Tunnel Rocks wheels are fast, smooth, and designed for vert, pools, skate parks, and streets. STR Racing wheels are made from high rebound urethane, which increases speed and grip. Formulated from a high quality urethane, Tunnel Tarantulas provide quick turning, grip, and rebound for longboarding. Also designed for longboards, Funnel wheels provide quick response and an even mix of momentum and grip. Tunnel skate wheels are available in a variety of bold colors and tie dye designs. Get ready to skate like you never have before because these wheels are like no other!
Since its beginning, Tunnel has been an undefeated name that other brands try to replicate. Stick with a brand that’s been there from the start and choose Tunnel skate gear!
The width of your truck axle should closely match the width of your skateboard deck, usually within 1/4”.
For additional info visit ourSkateboard Trucks Buying Guide
Truck height is measured from the bottom of the truck’s baseplate to the center of the axle. In general, a mid-sized truck works well for most skateboarders, but high or low trucks may be preferred for different styles of skaters.
LO - Provides extra stability for flip tricks, designed for small wheels (50-53mm wheel size recommended).
MID - Good all-around profile for street or park (53-56mm wheel size recommended).
HIGH - Great for cruising and carving, designed for large wheels (56mm+ wheel size recommended).
The hanger is the truck's T-shaped aluminum alloy grind area. It makes direct contact with rails and curbs. The hanger holds the axle on which the wheels are mounted. Hangers weigh about 10-13 oz, with lighter ones available. The width of your truck axle should closely match the width of your skateboard deck, usually within 1/4”.
Construction refers to the material(s) used in fabrication or the specific brand technology.
For additional info visit ourSkateboard Buying Guide
The average width of a skateboard deck is 7.5"- 8.25". Width is influenced by the size of the rider and the type of riding. Bigger riders and those skating ramps typically prefer a wider deck. Street skaters usually choose a smaller deck. Choose your skateboard deck according to the width, not length. Here are some general guidelines:
MICRO - Deck width: 6.75" or smaller - 5 years old or younger, under 3'4" tall. Size 3 shoes or smaller.
MINI - Deck width: 7.0" - 6 to 8 years old between 3'5" & 4'4" tall. Size 4-6 shoes.
MID - Deck width: 7.3" - 9 to 12 years old between 4'5" & 5'2" tall. Size 7-8 shoes.
FULL - Deck width: 7.5" or larger - for all skaters over age 13, taller than 5'3" with a shoe size of 9 or up.
7.5" to 8"Standard board for adult riders skating streets or doing more technical tricks
8.0" to 8.25"Skating pools, ramps and parks
8.25" and largerVert, pools, cruising and just going old school
Still having a hard time with size, try our Skateboard Sizer
For additional info visit ourSkateboard Decks Buying Guide
Deck type refers to the size or style (shape) of the skateboard deck. If you are a beginner, choose your deck according to the width, not the length. The width you need depends on your size, skating style and personal preference. Here are some general guidelines:
Cruisers, Old School, Freestyle, Longboard and Downhill all refer to a skateboarding style and the corresponding shape.
Length is measured from the tip of the nose to the tip of the tail. Average board length is 28"- 32" and longboards can range 32" and larger, but length is only referred to by advanced skaters.
Wheel size or diameter - All Skateboard wheels are measured in millimeters (mm). The smaller the number, the smaller the wheel. Smaller wheels are slower; bigger wheels are faster.
50-53mm - Small slower wheels, stable for trick riding and smaller riders skating street, skate parks and bowls.
54-59mm - Average wheel size for beginners and bigger riders skating street, skate parks, bowls and vert ramps.
60mm + - Specialty riders skating longboards, old-school boards, downhill and dirt boards; made for speed and rougher surfaces.
For additional info visit ourSkateboard Wheels Buying Guide
Durometer measures the wheel’s hardness. Harder wheels are faster; softer wheels are slower but have better grip.
78a-87a - Soft wheel good for rough surfaces, longboards or street boards that need lots of grip and easier to roll over cracks and pebbles. Designed for a smooth ride cruising, longboards, hills and rough surfaces.
88a-95a - Slightly harder and faster with a little less grip, but the grip's still good. Street; rough surfaces.
96a-99a - Good speed and grip - an all-around wheel. Great for beginners skating street, skate parks, ramps and pools. Smooth surfaces.
101a + - Hardest and fastest wheel with the least grip. Ineffective on slick and rough surfaces. These are pro wheels.
83b-84b - Wheels using the B scale are extremely hard, measuring 20 points lower than the the A Scale in order to allow the scale to extend another 20 points for harder wheels.
The laws for skateboarding helmets vary from state to state. Many states require that skaters wear a helmet under a certain age, and some states like California make all skaters under 18 wear a CPSC Certified helmet at all times. CSPC skateboard helmets usually have an EPS protective liner that meets the safety standards for skateboarding. Make sure you check your state's regulations before ordering.
CPSC Certified Helmets: California requires that all skateboard helmets must meet the requirements of the United States Consumer Product Safety Commission (CPSC). Section 890.4 of the Streets and Highways Code enforces these standards in California and will not allow Warehouse Skateboards to ship non-CPSC Certified helmets to California.
For additional info visit ourSkateboard Helmets Guide
Unsure of the size you need?
Visit our Clothing Sizing Charts
Most bearings are measured by an ABEC rating. The higher the ABEC rating, the more accurate and precise the bearing will be. This rating system includes grades 1,3,5,7 and 9. The closer you get to an ABEC 9 rating, the faster and less friction you will have when skateboarding.
Many companies do not use the ABEC rating scale. They brand their own specific technology.
For additional info visit ourSkateboard Bearings Buying Guide
Note: Each brands skateboard helmet size will vary; therefore, it is best to measure your head and refer to the sizing chart specific to each brand of helmet. In order to properly measure your head, follow these steps:
Wrap a soft tape measure around your forehead, just above your eyebrows and ears. Keep the tape measure level from the front to the back of your head. Your skateboard helmet should sit low on your forehead.
If you do not have a flexible tape measure, try marking a string and measuring it against a ruler.
If the helmet is a gift or you cannot measure the skater's head, measure the inside of a current helmet or hat they wear.
Within each skateboard helmet product page there are specific measurements for each skate brand. Use that information, along with your head size, to determine your correct helmet size before placing your order. This will ensure that you receive the best fit.
For additional info visit ourSizing Skateboard Helmets
Looking for your Egift Card Shopping Cart? Click here.