Slappy Truck Company ST1 Inverted Polished Skateboard Trucks - 6.125" Hanger 8.75" Axle (Set of 2)
These Slappy trucks have a 6.125" hanger and a 8.75" axle. Slappy Trucks were carefully designed by Mike Sinclair to offer the best grind clearance while maintaining an optimal turning radius. Grab a set and go have fun with Slappy.
NOTE: Sold only as a set of two (2) trucks.
- One (1) set of two (2) Polished Slappy Truck Company ST1 Inverted Polished Skateboard Trucks - 6.125" Hanger 8.75" Axle
- Axle width: 8.75"
- Weight: 1.6 lbs.
- Height: 53.9mm
- Hanger width: 6.125"
- Axle nuts and speed washers included
- Constructed from high-quality materials
Shop other Slappy Skateboard Trucks from Warehouse Skateboards.
How to Buy Skateboard Trucks
What size skateboard trucks do you need?
Skateboard trucks are the metal T-shaped pieces that mount onto the underside of the skateboard deck. When selecting skateboard trucks, the width of your truck axle should closely match the width of your skateboard deck. The truck size can be measured by the width of the hanger or the width of the axle. Every skateboard requires two trucks.
There are several parts that make up the skateboard trucks. The axle is the pin that runs through the trucks to which the wheels will attach. The hanger, usually made of metal, is the largest part of the skateboard truck that is somewhat triangular in shape. The axle runs through the hanger. The kingpin is the large bolt that holds these parts together and fits inside the skateboard bushings.
When purchasing, you will receive the two trucks necessary to assemble your skateboard. Skateboard trucks come in various sizes and colors, and Warehouse Skateboards carries a huge selection of brands to fit your personal preference.6"-7.25" truck axle - 6.5" to 7.25" skateboard decks
7.5" truck axle - 7.25 to 7.5" skateboard decks
7.75" truck axle - 7.5” to 8" skateboard decks
8.0" truck axle - 8” to 8.5" skateboard decks
8.5" truck axle - 8.5” to 9" skateboard decks
9.0" truck axle - 9” to 10” skateboard decks
10.0" truck axle - 10” and above skateboard decks
What truck profile height do I need?
Truck profile is the distance between the bottom of the skate deck and the hanger. In general, a mid-sized truck works well for most skateboarders, but high or low trucks may be preferred for different styles of skating.
Provides extra stability for flip tricks, designed for small wheels (50-53mm wheel size recommended)
Good all-around profile for street or park (53-56mm wheel size recommended)
Great for cruising and carving, designed for large wheels (56mm+ wheel size recommended)
Check out our massive selection of skateboard trucks.
If you still have questions about skateboard trucks, please visit our Skateboard Trucks Buying Guide.