Mini Logo Orange Skateboard Truck Pivot Cups - 10 Pack
Pivot cups are a small cushion (usually a "cup" shape) between the "pivot point" of your truck’s hanger and the baseplate itself. Their job is to help your truck turn about the baseplate's intended angle, and can prevent unwanted movement in the truck- you'll notice them most when your truck is leaning from side-to-side. There are two main kinds of pivot cups:
These Mini Logo Orange Skateboard Truck Pivot Cups - 10 Pack will keep your trucks flexible and adaptable. Made by Mini Logo from high-quality materials, they provide flexibility and easy adaptability for your skateboard trucks.
Shop other Mini Logo Pivot Cups from Warehouse Skateboards.
Skateboard bushings are rubbery-like rings that fit into the skateboard trucks. Each skateboard truck usually has two bushings. The bushings are placed between the baseplate and the hanger and provide the cushion mechanism for turning the skateboard. To be specific, one of the bushings provides the flexibility and turning capabilities of the skateboard truck, while the other allows the trucks to be loosened or tightened depending on your personal preferences. Some riders tend to like their skateboard trucks tight, to better perform ticks. The stiffer the bushings, the more resistant the skateboard is to turning. Other skaters choose to loosen their skateboard trucks for street riding or cruising.
To determine the hardness of the skateboard bushings, we refer to the durometer. Skateboard bushing durometer is usually measured on a Durometer A Scale which goes from 1-100 to measure hardness. Some companies use the B Scale which measures 20 points lower, allowing the scale to be extended by 20 points for harder bushings. So an 80b durometer is the same as 100a durometer.