Caliber Trucks II 44 Degree Blackout Skateboard Reverse Kingpin Trucks - 7.25" Hanger 10.0" Axle (Set of 2)
Caliber Truck Company has been working hard to create the next generation of Caliber Trucks; The Caliber II Forty-Four.
The Forty-Four Caliber is built for speed. The 44 degree hanger angle allows performance riders to push the limits of downhill racing. To further optimize the trucks' stability, Blood Orange Bushings are configured with two 89a durometer barrels to avoid high speed wobbles. Like all Caliber Trucks, the kingpin is made of grade 8 steel to ensure your trucks will stay in one piece, no matter how hard you push them.
NOTE: Sold only as a set of two (2) trucks.
- One (1) set of two (2) Blackout Caliber Trucks II 44 Degree Blackout Skateboard Reverse Kingpin Trucks - 7.25" Hanger 10.0" Axle
- Axle width: 10.0"
- Hanger width: 7.25"
- 44-Degree contained baseplate
- Blood Orange Double Barrel Ultra-HR Bushing Set (89A)
- Updated bushing seat providing a perfect no-slip-fit
- Pivot re-designed for tighter tolerances with an updated chamfer
- Circular kingpin hole with updated diameter
- Truck strength increased by 40%
- Pressed-in Grade 8 Steal Kingpin
- Beefed up and reinforced baseplate
- Thinner paints for tightened tolerances
- Designed for High Speed and Stability
How to Buy Skateboard Trucks
What size skateboard trucks do you need?
Skateboard trucks are the metal T-shaped pieces that mount onto the underside of the skateboard deck. When selecting skateboard trucks, the width of your truck axle should closely match the width of your skateboard deck. The truck size can be measured by the width of the hanger or the width of the axle. Every skateboard requires two trucks.
There are several parts that make up the skateboard trucks. The axle is the pin that runs through the trucks to which the wheels will attach. The hanger, usually made of metal, is the largest part of the skateboard truck that is somewhat triangular in shape. The axle runs through the hanger. The kingpin is the large bolt that holds these parts together and fits inside the skateboard bushings.
When purchasing, you will receive the two trucks necessary to assemble your skateboard. Skateboard trucks come in various sizes and colors, and Warehouse Skateboards carries a huge selection of brands to fit your personal preference.6"-7.25" truck axle - 6.5" to 7.25" skateboard decks
7.5" truck axle - 7.25 to 7.5" skateboard decks
7.75" truck axle - 7.5” to 8" skateboard decks
8.0" truck axle - 8” to 8.5" skateboard decks
8.5" truck axle - 8.5” to 9" skateboard decks
9.0" truck axle - 9” to 10” skateboard decks
10.0" truck axle - 10” and above skateboard decks
What truck profile height do I need?
Truck profile is the distance between the bottom of the skate deck and the hanger. In general, a mid-sized truck works well for most skateboarders, but high or low trucks may be preferred for different styles of skating.
Provides extra stability for flip tricks, designed for small wheels (50-53mm wheel size recommended)
Good all-around profile for street or park (53-56mm wheel size recommended)
Great for cruising and carving, designed for large wheels (56mm+ wheel size recommended)