Andale Bearings 8mm P-Rod Pen Box Pro Swiss Skateboard Bearings
These brand new, professional grade Swiss bearings by Andale are pre-lubricated for a smooth, fast ride. They come in the standard size (608 with an 8mm core, 22mm outer diameter, and 7mm width) and provide the best for performance and durability. Each set of Andale Bearings 8mm P-Rod Pen Box Pro Swiss Skateboard Bearings contains eight (8) bearings, which is enough for four (4) wheels.
Andalé P. ROD Swiss Pen Box Pro Rated Bearing Set of 8 Bearings with 4 Bearing Spacers.White / Red
Features: · Paul Rodriguez Signature Pro Bearings. · Premium Pro Rated Andalé Swiss Bearings designed and tested by P-ROD to withstand the impact and abuse of everyday skateboarding. · Higher quality steel races, better quality and grade balls, and a superior surface finish. · Single, non-contact, removable rubber shield for easy cleaning and less friction. · High speed nylon ball retainer for greater strength and speed. · High Impact Testing: These bearings have been tested against crushing forces of over a ton. That's a spicy ollie!
The Paul Rodriguez Pro Rated Swiss Pen Box Signature Bearings are designed and tested by Paul to withstand the impact, abuse, wear, and tear of everyday skateboarding. Paul tested countless sets of newly developed samples and these specific bearings are the ones that P-ROD prefers to skate. Andalé Bearings is a skater owned and operated company headed up by Joey Brezinski and Paul Rodriguez. Andalé aims to bring you the best quality bearings at affordable prices to keep you rolling strong. Andale was founded in 2010 by Joey and Paul, since then they have developed premium bearings and built up a solid team of riders ranging from up and coming ams to legends like Daewon Song and Marc Johnson. Always Fast. Pro Rated; Team Andalé Tested and Approved.
All skateboard bearings are the same size, so you don't need to worry about size when selecting bearings.
Skateboard bearings are used to mount the skateboard wheels to the skateboard axle. Skateboard bearings are all the same size and will fit any skateboard wheel that Warehouse Skateboards sells.
While they do not vary in size, they do vary in quality. The rule of thumb tends to be that the more expensive the skateboard bearings, the higher the quality. Cheaper bearings are typically made of lower quality materials, which can get deformed or break completely under the pressure of skateboarding. Inexpensive bearings may also not be sealed as well, resulting in dirt and debris in your bearings that will slow your board down dramatically. The more expensive skateboard bearings are sealed, with higher precession machining, and higher-quality metals. They will remain fast and precise over time with proper maintenance.
Most bearings are measured by an ABEC rating. The higher the ABEC rating, the more accurate and precise the bearing will be. This rating system includes grades 1, 3, 5, 7, and 9. The ABEC rating does not specify many critical factors, such as load handling capabilities, ball precision, materials, material Rockwell hardness, degree of ball and raceway polishing, noise, vibration, and lubricant. Due to these factors, an ABEC 3 classified bearing could perform better than an ABEC 7 bearing.
Many companies do not use the ABEC rating scale, such as Bones Bearings. Bones Bearings uses their own rating system known as Skate Rated. These bearings do not follow the ABEC ratings because they are superior in quality and the ABEC rating ignores many quality factors in which Bones Bearings prides itself.