.jpg "Bones Bearings - 8mm Bones Swiss Labyrinth L2 Skateboard Bearings (8) Pack")
.jpg "Bones Bearings - 8mm Bones Swiss Labyrinth L2 Skateboard Bearings (8) Pack")
.jpg "Bones Bearings - 8mm Bones Swiss Labyrinth L2 Skateboard Bearings (8) Pack")
Product Information
This new bearing is similar to the original Bones® Swiss bearing, but with a redesigned inner race and two labyrinth seals to keep dirt out even better than before. Bones Labyrinth shields are non-contact, so that they do not increase friction, only the distance dirt particles must travel to get past the shields. The only difference you will notice is that the labyrinth shield Bones will last several times longer than the original Bones Swiss between cleanings. This significant increase in service life comes at a very small increase in retail cost, so the value is greatly increased.
Bones Bearings - 8mm Bones Swiss Labyrinth L2 Skateboard Bearings (8) Pack Features:
- Double labyrinth non-contact, removable rubber shields allow easy cleaning and low friction.
- High speed nylon ball retainer provides added speed and strength.
- Pre-lubricated with Speed Cream™ racing lubricant.
- Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
Bones Bearings - 8mm Bones Swiss Labyrinth L2 Skateboard Bearings (8) Pack Contents:
- Set of 8 bearings
- 4 Bearing Spacers
- Instructions
- Sticker
As a proud owner of Bones Bearings, now check out tips on Maintaining and Cleaning your Bones Bearings.
Keep your Bones Bearings rolling fast and smooth with Bones Bearings Speed Cream.
Shop other Bones Bearings Bearings from Warehouse Skateboards.
Help Guide
How to Buy Skateboard Bearings
What size skateboard bearings do I need for my skateboard wheels?
All skateboard bearings are the same size, so you don't need to worry about size when selecting bearings.
Skateboard bearings are used to mount the skateboard wheels to the skateboard axle. Skateboard bearings are all the same size and will fit any skateboard wheel that Warehouse Skateboards sells.
While they do not vary in size, they do vary in quality. The rule of thumb tends to be that the more expensive the skateboard bearings, the higher the quality. Cheaper bearings are typically made of lower quality materials, which can get deformed or break completely under the pressure of skateboarding. Inexpensive bearings may also not be sealed as well, resulting in dirt and debris in your bearings that will slow your board down dramatically. The more expensive skateboard bearings are sealed, with higher precession machining, and higher-quality metals. They will remain fast and precise over time with proper maintenance.
ABEC ratings
Most bearings are measured by an ABEC rating. The higher the ABEC rating, the more accurate and precise the bearing will be. This rating system includes grades 1, 3, 5, 7, and 9. The ABEC rating does not specify many critical factors, such as load handling capabilities, ball precision, materials, material Rockwell hardness, degree of ball and raceway polishing, noise, vibration, and lubricant. Due to these factors, an ABEC 3 classified bearing could perform better than an ABEC 7 bearing.
Many companies do not use the ABEC rating scale, such as Bones Bearings. Bones Bearings uses their own rating system known as Skate Rated. These bearings do not follow the ABEC ratings because they are superior in quality and the ABEC rating ignores many quality factors in which Bones Bearings prides itself.