Bones Bearings - Bones Bearings

Bones Bearings - Bones Swiss Labyrinth Skateboard Bearings

Item # 1BBOB5SL0100000

Product Information

This new bearing is similar to the original Bones® Swiss bearing, but with a redesigned inner race and two labyrinth seals to keep dirt out even better than before. Bones Labyrinth shields are non-contact, so that they do not increase friction, only the distance dirt particles must travel to get past the shields. The only difference you will notice is that the labyrinth shield Bones will last several times longer than the original Bones Swiss between cleanings. This significant increase in service life comes at a very small increase in retail cost, so the value is greatly increased.

Bones Bearings - Bones Bearings Features:

  • Double labyrinth non-contact, removable rubber shields allow easy cleaning and low friction.
  • High speed nylon ball retainer provides added speed and strength.
  • Pre-lubricated with Speed Cream™ racing lubricant.
  • Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

Bones Bearings - Bones Bearings Contents:

  • Set of 8 bearings
  • 4 Bearing Spacers
  • Instructions
  • Sticker

As a proud owner of Bones Bearings, now check out tips on Maintaining and Cleaning your Bones Bearings.

Keep your Bones Bearings rolling fast and smooth with Bones Bearings Speed Cream.

Return/Exchange Policy

How to Buy Skateboard Bearings

What size skateboard bearings do I need for my skateboard wheels?

All skateboard bearings are the same size, so you don't need to worry about size when selecting bearings. However, the ABEC rating denotes the quality of materials and precision used in manufacturing the bearing. Higher rated bearings are higher quality.

Skateboard bearings are used to mount the skateboard wheels to the skateboard axle. Skateboard bearings are all the same size and will fit any skateboard wheel that Warehouse Skateboards sells.

While they do not vary in size, they do vary in quality. The rule of thumb tends to be that the more expensive the skateboard bearings, the higher the quality. Cheaper bearings are typically made of lower quality materials, which can get deformed or break completely under the pressure of skateboarding. Inexpensive bearings may also not be sealed as well, resulting in dirt and debris in your bearings that will slow your board down dramatically. The more expensive skateboard bearings are sealed, with higher precession machining, and higher-quality metals. They will remain fast and precise over time with proper maintenance.

Skateboard Bearings at Warehouse Skateboads

ABEC ratings

Most bearings are measured by an ABEC rating. The higher the ABEC rating, the more accurate and precise the bearing will be. This rating system includes grades 1, 3, 5, 7, and 9. The closer you get to an ABEC 9 rating, the faster you will go and the less friction you will have when skateboarding.

ABEC 1 skateboard bearings tend to be the least expensive, most crude, and least precise.
ABEC 3 skateboard bearings tend to be inexpensive and do not roll very smoothly or quickly.
ABEC 5 skateboard bearings are the norm in skateboarding. With this rating you get a good amount of speed at an average cost.
ABEC 7 skateboard bearings are very fast and smooth and tend to be slightly more expensive.
ABEC 9 and higher skateboard bearings are extremely fast and are used more for downhill skating and skaters that want to go insanely fast.

Many companies do not use the ABEC rating scale, such as Bones Bearings. Bones Bearings uses their own rating system known as Skate Rated. These bearings do not follow the ABEC ratings because they are superior in quality and the ABEC rating ignores many quality factors in which Bones Bearings prides itself.

Check out the wide variety of skateboard bearings in stock.
If you still have questions about skateboard bearings, please visit our Skateboard Bearings Buying Guide.

Shopping Cart

Your shopping cart is empty.

Looking for your Egift Card Shopping Cart?
Click here.

Item Subtotal

Powered by SageCommerce 3.2.8